| BRAND | TEKNIC |
| Product | MPC034-24-003-T |
| Description | Brake |
| Internal code | IMP5133280 |
| Weight | 1.08862 |
| Technical specification | <table><tbody><tr><td>Brake type</td><td>Spring applied, power-off, NEMA face mount</td></tr><tr><td>Dimensions</td><td>63mm length (±1.0); 82.5mm x 82.5mm wide<br>Output shaft diameter: 1/2 inch<br>Input shaft diameter: 1/2 inch</td></tr><tr><td>Clamp collar screw torque</td><td>9.2 Nm</td></tr></tbody></table><table><tbody><tr><td>Voltage requirement</td><td>24 VDC nominal (20 VDC min)</td></tr><tr><td>Current draw</td><td>0.41 Amps</td></tr><tr><td>Output</td><td>1.68 Nm holding torque</td></tr><tr><td>Input</td><td>6000 RPM max speed</td></tr><tr><td>Environmental Rating</td><td>IP54</td></tr><tr><td>Maximum Radial Load</td><td>50 lbf (222.4 N)</td></tr><tr><td>Emergency stop cycles (brake actuates while the motor is spinning)</td><td>*Emergency stops will reduce the life of the brake. Contact Teknic for more details.</td></tr><tr><td>No speed actuations (brake actuates while the motor is not spinning)</td><td>300,000 (min)</td></tr><tr><td>Engage time (time required for the brake to engage after 24VDC is removed)</td><td>10 ms (max)</td></tr><tr><td>Disengage time</td><td>20 ms (max)</td></tr></tbody></table> |
default.send_request_amp_Group2