| BRAND | Rotork |
| Product | IQ12 F10 B4 [IP68] 400/3/50 24RPM |
| Internal code | IMP5063322 |
| Weight | 31 |
| Technical specification | Wiring diagram 100B0000 is described in IQ/IQT Control and Monitoring publication (PUB002-041) and includes: • CONTROL SUPPLY: 20 – 60VDC/40 – 120VAC or actuator derived 24VDC • CONTROL INPUTS: 6 inputs for open, close, stop/maintain, ESD and interlock signals • INDICATION CONTACTS: 4 volt-free (SPST) latching contacts (S1-S4), rated at 120VAC/30VDC, 5mA to 5A, each configurable NO or NC to signal one of the following; open/closed or intermediate positions, moving (continuous or pulsing), Handwheel operation, local selected, remote selected, open/close interlock active, ESD active, motor tripped on torque in mid travel/going open/going closed, valve jammed, loss of power/phase or control supply, battery low, internal failure detected, thermostat tripped, programmable service alarms. • MONITOR AND AVAILABILITY RELAY: Independent relay with volt-free changeover contact, rated at 120VAC/30VDC, 5mA to 5A. De-energises in case of; loss of power/phase or control supply, local control or local stop selected (can be excluded), motor thermostat tripped or detected internal failure POWER SUPPLY – 400/3/50 The actuators offered are suitable for operation on a nominal supply of 400/3/50 Tolerances: Voltage: +/- 10%, Frequency: +/- 5% Tolerances apply to rated torque performance only, duty cycle and speed are not guaranteed |
default.send_request_amp_Group2